Petroleum Well Control Equipment Co., Ltd.(PWCE)

API 6A Casing Head and Wellhead Assembly

Short Description:

The pressure-bearing shell is made of forged alloy steel with high strength, few defects and high pressure-bearing capacity.

The mandrel hanger is made of forgings, which leads to high bearing capacity and reliable sealing.

All metal parts of the slip hanger are made of forged alloy steel. The slip teeth are carburized and quenched. The unique tooth shape design has the characteristics of reliable operation and high bearing strength.

The valve equipped adopts a non-rising stem, which has a small switching torque and convenient operation.

The slip-type hanger and mandrel-type hanger can be interchanged.

The casing hanging mode: slip type, thread type, and sliding welding type.

Product Detail

Product Tags

The options for the casing head are as follows:

The bottom connection of the casing head is either an API round box thread or API buttress box thread; it can also be a type connection.

It can be provided with a weld-supporting base plate.

Side outlets could be pipeline thread or studded, studded side outlet is machined with female thread for connecting the R 1.1/2" reversing valve.

Explosive View


Rated WP 21MPa、35MPa、70MPa 、105MPa
Casing Head-Threaded or Welded Bottom
截屏2023-07-17 10.05.13

Single-stage thread type:

It can process all kinds of casing thread and connect with the surface casing through the pin*pin nipple, which is quick and convenient to install. The production casing can be suspended by mandrel or slip.

Split double stage type: 

It can hang three layers of casing, the surface casing can be threaded or sliding into welding type, and the technical casing and production casing can be of slip type or mandrel type.

Slip-type bottom connection casing head: 

The upper locking screw is used to make the slip tooth clamp the surface casing. And BT-type casing sealing ring is provided, which is firmly connected, convenient and reliable.

Casing head auxiliary tools

Wearing bush

Wearing bush is mainly used to prevent the casing head and the inner cavity sealing surface of the cross from being damaged by drilling tools during drilling operations.

On-going tools

Used to take out the Wearing bush.

Pressure test plug

The pressure test plug is located on the inner shoulder of the casing head spool and tests the tightness of the BOP, drilling spool and casing head through the drill pipe.


  • Previous:
  • Next:

  • Write your message here and send it to us

    Products categories